346 jst 5 this 2.5mm (.098") pitch connector for printed circuit boards has an ultra-thin construction. the in-line method provides high-density capability to the end user. features ?twin u-slot insulation displacement section the insulation displacement section has reliable twin u-slots like those of jst's other insulation displacement connectors. ?ultra-thin design the connector is very small, with a mounting height of 11.3mm (.445") and a width of 4.1mm (.161"). ?high reliability the contact has a dimple where it mates with the post to ensure a continuous gas tight connection when used for circuits requiring minute amounts of current and voltage. in addition, it is built to withstand vibration and prevent deformation. ?strain relief a metallic strain relief secures the wire so as to protect the insulation displacement connection against vibration, impact and other external forces. ?interchangeability the shrouded header is interchangeable with the 2.5mm (.098") pitch crimp style eh connectors. specifications current rating: 2a ac, dc (awg #24) voltage rating: 250v ac, dc temperature range: -25 ? c to +85 ? c (including temperature rise in applying electrical current) contact resistance: initial value/10m ? max. after environmental testing/20m ? max. insulation resistance: 1,000m ? min. withstanding voltage: 1,000v ac/minute applicable wire: ul1007 (contact jst for details regarding other ul wires.) awg #28, #26, #24 conductor/7 strands, tin-coated insulation o.d./1.0 to 1.5mm(.039" to .059") applicable pc board thickness: 0.8 to 1.6mm(.031" to .063") * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 r75089 hr connector disconnectable insulation displacement connectors 2.5mm (.098") pitch idc radial tape
347 receptacle 4.1(.161) 10.3(.406) 3.6(.142) a b 2.5 (.098) 2.5 (.098) cir- cuits model no. dimensions mm(in.) ab q'ty / box material and finish 2 3 4 5 6 7 8 9 10 11 12 13 15 02hr-8m 03hr-8m 04hr-8m 05hr-8m 06hr-8m 07hr-8m 08hr-8m 09HR-8M 10hr-8m 11hr-8m 12hr-8m 13hr-8m - 02hr-6s 03hr-6s 04hr-6s 05hr-6s 06hr-6s 07hr-6s 08hr-6s 09hr-6s 10hr-6s 11hr-6s 12hr-6s 13hr-6s 15hr-6s 02hr-4k 03hr-4k 04hr-4k 05hr-4k 06hr-4k 07hr-4k 08hr-4k 09hr-4k 10hr-4k 11hr-4k 12hr-4k 13hr-4k 15hr-4k 2.5( .098) 5.0( .197) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 35.0(1.378) 7.5( .295) 10.0( .394) 12.5( .492) 15.0( .591) 17.5( .689) 20.0( .787) 22.5( .886) 25.0( .984) 27.5(1.083) 30.0(1.181) 32.5(1.280) 35.0(1.378) 40.0(1.575) 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 250 250 contact: phosphor bronze, copper-undercoated, tin/lead-plated housing: nylon 66, ul94v-0 (green) awg #28 (natural/white) awg #26 awg #24 (black) pc board layout (viewed from soldering side) and assembly layout 11.3(.445) (.161) 4.1 2.5 0.05 (.098 .002) 2.5 (.098) min. 0.9 +0.1 (.035 )dia. 2.2 (.087) min. 0 +.004 0 6.7(.264) 2.5 0.05 (.098 .002) 2.5 (.098) min. 13.5(.531) (.165) 4.2 0.9 +0.1 (.035 )dia. 6.7 (.264) min. 0 +.004 0 4.4 (.173) 11.8(.465) 2.5 0.05 (.098 .002) 2.5 (.098) min. 2.2 (.087) min. 0.9 +0.1 (.035 )dia. 0 +.004 0 note: 1. tolerances are non-cumulative: 0.05mm ( .002" ) for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. if pc boards made of hard material are used, the hole dimensions should be larger. the dimensions above should serve as a guideline. contact jst for details. shrouded header the shrouded headers are interchangeable with those of the eh and hr crimp style connectors. top entry type top entry type on radial-tape side entry type note: 15hr-6s and 15hr-4k are not ul/csa/tu v approved. hr connector
|
